Question for Guitar Tech? - preamp kits
I have a Squier Start that was my first guitar. I took a pack of "starter" with an amp, strap etc..
I wanted in a "quiet Fender Hot Pickup Set 3 Put":
http://accessories.musiciansfriend.com/p ...
and a Fender Pre-Amp Mid Boost Kit 25 DB ":
http://accessories.musiciansfriend.com/p ...
I'm sure you will have no problem to replace the pads, but I'm going to use in a position to the technology? The only way I've seen people use the preamp is on Fender Stratocaster, as the preparatory work on a Squier?
Friday, January 15, 2010
Preamp Kits Question For Guitar Tech?
2 comments:
Sure it would work. But if you put things in a cheap Squier, I recommend that instead of saving for a fender, then things in it. The reason is that your Squier easily met in May and can later break. So to save money, you sell your current Squier, buy a Fender made, then the things in it. So you have a good guitar with good electronics.
You also know how to weld? The big question is when installing the new electronic system.
I agree with the reaction of others - if the guitar works for you, so that's OK. There is a difference in the quality of the material, yes, .... between Fender and Squier brand but it is a significant price difference, and it is not practical for many of us.
Yo, when I started to have the game with guitars, I do not buy a guitar and begins to separate and to resolder Nice and all of the junk - I took my guitar chaos cheapest and destroyed. And if it is damaged? Nothing of importance - it's a cheap guitar, after all!
In general, aftermarket chips that improve the sound of a guitar dramatically, especially low price guitars, and I do not see why you can not change the front.
The wiring is the same with the officers 'Start' and start copies Squier, so there is no reason not to a Squier if you start in one of the work.
Just be sure to get wiring diagrams and follow closely. My suggestion is get a multimeter, when in factto help ensure continuity of evidence is (for example, make sure to solder is a good thing), this kind of thing. Also recommended is one of the empty barrels (do not know how else to describe it) instead DESOLDERING or a vacuum bulb, like SOOOO much easier to get out of welded components in this way.
Hmm. Let me see if I can find a link ....
Ha! Found. I love this thing!
Good luck and be careful - the weld in a well ventilated, etc. Google "Welding Safety", something like that, and you protect yourself and your environment when you start to do so.
Saul
Post a Comment